Differences

This shows you the differences between two versions of the page.

--- raptor_computing_systems [2026/04/22 12:17] – old revision restored (2023/07/25 08:39) thum
+++ raptor_computing_systems [2026/04/22 12:26] (current) – thum
@@ Line 1: / Line 1: @@
-=======Raptor Computing Systems=======
+======= Raptor Computing Systems =======
-**Raptor Computing Systems**, abbreviated as **RCS**, sells OpenPOWER systems under the Talos brand. It is closely affiliated with [[Raptor_Engineering|Raptor Engineering]].
+**Raptor Computing Systems**, abbreviated as **RCS**, sells OpenPOWER systems under the Talos brand. It is closely affiliated with [[Raptor_Engineering|Raptor Engineering]].  It's known for developing the [[hardware:raptor_talos_ii|Talos II]] and [[hardware:raptor_blackbird|Blackbird]] systems.
 ===== External Links =====
@@ Line 10: / Line 10: @@
+===== See also =====
-Re: Blackbird serial #D1000275, tg3 " Problem fetching invariants of chip" [#663731]
+  * [[:raptor_engineering|Raptor Engineering]]
+  * [[hardware:raptor_talos_ii|Talos II]]
-Do you have access to a serial cable that would allow you to plug in to the IDC header for the BMC? As we are aware this is late to a customer, the fastest method to bypass the password issue would simply be to execute a BMC password reset over serial.
+  * [[hardware:raptor_blackbird|Blackbird]]
-- The Raptor Computing Systems Support Team
-The process is fairly straightforward:
-https://wiki.raptorcs.com/wiki/Debricking_the_BMC#Reset_persistent_storage
-To make things easier, you can put the FPGA into reset via the DIP switch as soon as you have a U-boot prompt, that way the watchdog won't reset the BMC and you have more time to type the commands.
-- The Raptor Computing Systems Support Team
-The i2c bus messages are, unfortunately, normal. This is something we've been working over time to fix in the kernel, but ASpeed has been fighting it somewhat. We'll be trying again at some point for the next firmware update cycle.
-You can suppress them temporarily with "dmesg -n 0".
-- The Raptor Computing Systems Support Team